XPG Core Reactor II 1200W PSU Review – Platinum > Gold

Hold Up Time

The hold-up time is long, and the power ok signal is accurate.

Inrush Current

The inrush current is a bit high at 115V. I couldn’t get a proper measurement at 230V. Sometimes, this can happen.

Timings

The PSU supports Alternative Low Power Modes and has a 5VSB rail that can deliver 3A (or more) of current.

A note: for PSUs supporting ALPM, the 5VSB rail should be able to deliver more than 2.5A max current output. The ATX spec recommends at least 3A at 5VSB when the PSU supports Alternative Low Power Modes.

Pages ( 6 of 11 ): « Previous12345 6 7891011Next »

Related Posts

One thought on “XPG Core Reactor II 1200W PSU Review – Platinum > Gold

  1. fwiw I got some horrible coil whine with this PSU on low loads. Not sure if it was just my unit but had to return it as it was unbearable without headphones on windows’ power saver power plan, mostly disappeared on balanced if I wasn’t mostly idle

Leave a Reply

Your email address will not be published. Required fields are marked *