Super Flower Leadex VII Gold 1300W (SF-1300F14XG) PSU Review

Load Regulation

Test 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) Temps (In/Out) PF/AC Volts
10% 8.981A 1.983A 1.982A 0.979A 129.987 89.632% 0 <6.0 44.45C 0.984
12.069V 5.044V 3.33V 5.107V 145.023 40.02C 114.97V
20% 18.991A 2.974A 2.974A 1.177A 259.934 92.115% 0 <6.0 45.45C 0.983
12.060V 5.043V 3.329V 5.096V 282.185 40.66C 114.97V
30% 29.320A 3.47A 3.47A 1.376A 389.467 92.456% 0 <6.0 46.79C 0.989
12.053V 5.043V 3.329V 5.085V 421.248 41.46C 114.96V
40% 39.692A 3.967A 3.966A 1.576A 519.434 92.272% 378 <6.0 41.85C 0.993
12.048V 5.043V 3.328V 5.075V 562.937 47.63C 114.96V
50% 49.758A 4.96A 4.958A 1.777A 649.57 91.804% 634 20.0 42.44C 0.994
12.039V 5.042V 3.328V 5.064V 707.565 48.61C 114.95V
60% 59.830A 5.952A 5.951A 1.979A 779.687 90.993% 911 31.7 42.96C 0.995
12.032V 5.041V 3.328V 5.053V 856.868 49.49C 114.95V
70% 69.921A 6.946A 6.944A 2.181A 909.768 90.236% 1198 40.8 43.3C 0.995
12.023V 5.04V 3.327V 5.042V 1008.215 50.39C 114.94V
80% 79.997A 7.94A 7.933A 2.285A 1039.365 89.422% 1428 44.9 44.64C 0.995
12.019V 5.04V 3.326V 5.033V 1162.312 52.69C 114.94V
90% 90.462A 8.433A 8.415A 2.388A 1169.569 88.572% 1606 49.1 44.73C 0.996
12.017V 5.039V 3.326V 5.023V 1320.469 53.77C 114.93V
100% 100.663A 8.93A 8.926A 2.995A 1299.18 87.708% 1765 50.9 45.13C 0.996
12.015V 5.038V 3.326V 5.007V 1481.264 55.22C 114.92V
110% 110.820A 9.921A 10.008A 2.999A 1429.348 86.675% 1836 51.2 46.65C 0.996
12.011V 5.039V 3.326V 5V 1649.09 57.58C 114.91V
CL1 0.115A 11.909A 11.909A 0A 101.261 82.75% 617 19.3 39.35C 0.987
12.078V 5.054V 3.332V 5.118V 122.396 44.84C 114.99V
CL2 0.114A 19.765A 0A 0A 101.375 82.582% 383 <6.0 39.58C 0.987
12.080V 5.059V 3.328V 5.121V 122.758 46.65C 114.98V
CL3 0.114A 0A 19.779A 0A 67.358 77.033% 524 14.1 38.60C 0.965
12.079V 5.046V 3.336V 5.119V 87.441 47.66C 114.98V
CL4 108.189A 0A 0A 0.001A 1299.816 88.202% 1717 49.7 47.17C 0.996
12.014V 5.03V 3.325V 5.07V 1473.691 58.04C 114.9V

Load regulation is tight on all significant rails, especially at 5V and 3.3V.

Ripple Suppression

Test 12V 5V 3.3V 5VSB Pass/Fail
10% Load 29.6 mV 5.6 mV 7.9 mV 11.0 mV Pass
20% Load 27.5 mV 6.0 mV 7.5 mV 11.0 mV Pass
30% Load 28.7 mV 6.3 mV 7.6 mV 10.9 mV Pass
40% Load 29.1 mV 7.5 mV 7.9 mV 13.3 mV Pass
50% Load 26.7 mV 8.6 mV 8.7 mV 12.3 mV Pass
60% Load 11.1 mV 8.1 mV 8.6 mV 12.5 mV Pass
70% Load 32.8 mV 9.6 mV 9.9 mV 13.7 mV Pass
80% Load 31.8 mV 11.0 mV 12.9 mV 15.0 mV Pass
90% Load 13.1 mV 12.0 mV 12.9 mV 15.9 mV Pass
100% Load 18.3 mV 14.9 mV 14.1 mV 22.2 mV Pass
110% Load 18.5 mV 16.5 mV 16.7 mV 31.7 mV Pass
Crossload 1 9.4 mV 9.8 mV 12.0 mV 27.6 mV Pass
Crossload 2 29.0 mV 8.9 mV 8.4 mV 27.1 mV Pass
Crossload 3 30.4 mV 8.8 mV 13.0 mV 26.1 mV Pass
Crossload 4 17.4 mV 11.5 mV 12.1 mV 27.7 mV Pass

Ripple suppression is good. Above 20mV of ripple at 5VSB is nothing to worry about.

Pages ( 4 of 11 ): « Previous123 4 567891011Next »

Related Posts

12 thoughts on “Super Flower Leadex VII Gold 1300W (SF-1300F14XG) PSU Review

  1. Hi Crmaris,

    When will this psu be released in eu?

    I cant find a good 1200 watt ATX 3.0 psu in europe.

    Nothing comes close to this cpu as far as i know. What should i do or buy tom come close to this psu? Im lost. Biggest factor for me is noise and coilwhine.

    Kind regards,
    Sam

  2. I needed a high wattage PSU and decided to buy this on Newegg for 185 USD largely based on this review. Many of the 1000W PSU featured on this site was priced 140 USD and often more according to PCpartpickers, so it wasn’t that hard of decision to pay a little extra for this instead.

  3. no case is included on the current release of this PSU. I think all PSU’s should come with a case/bag. Feels very cheap to see it in this review but not in the retail release.

    Not a reason to avoid but something to note. The cables felt a lot less substantial than a msi 1000w unit I was pulling out (DOA unit being returned). The MSI MPG also had nice sleeved cables while this one had more standard ones with very poor QC on the rubber tape/band wrapped around the 12VHPWR. Glue was allowed to seep and dry from the tape and just made everything look sloppy. Not what someone wants to put in their 3-4k PC.

Leave a Reply

Your email address will not be published. Required fields are marked *