Montech King 95 Pro Case Review: Thermal & Noise Damping/Output Evaluation

The Montech King 95 Pro is a mid-tower chassis, offering an unobstruced view to your system thanks to the front and side glass panels. It follows a dual chamber design, so it can accomodate an increased number of hard drives and two power supplies, for systems with more than one high-end GPUs. 

Montech includes in its portfolio the King 95 Pro, a large, dual-chamber chassis that allows you to build extra high-end systems, should you have the pockets to buy all necessary parts. This case has six pre-installed RGB fans, focusing on high airflow. Moreover, the front and side panels are made of tempered glass, providing a clear view of the system’s internals. This is a double-edged sword, though, since it means that the system has to be super clean to look nice, meaning that your cable management skills have to be high.


As you can see in the video above, the side-mounted fans assist in pushing the air through the outer edge of the chassis, and according to Montech then, the air goes to the rear because of the angle of the front tempered glass panel. If you want an even higher airflow, you can replace the front glass panel with a mesh one included in the product’s bundle. So, this chassis can be configured in two modes:

  • Glass Mode
  • Turbo Mesh Mode

The first looks nicer, but the second can lower the temperatures at the internals because of the increased airflow.

Official Technical Specifications:
  • Model Name: King 95 Pro
  • Case Type: Mid Tower / Dual Chamber
  • Materials: Steel (SGCC), Aluminum, ABS Plastic, Tempered Glass
  • Available Colors: Gentleman Black, Pure White, Vibrant Red, or Prussian Blue
  • Motherboard compatibility: ATX / M-ATX / Mini-ATX
  • Pre-installed fans: [Side] 2x, [Bottom] 3x, [Rear] 1x
  • Fan Type: 140/120mm Reversed ARGB PWM Fans, 120mm ARGB PWM Fans
  • Fan bearing: Hydro Dynamic Bearing (HDB) (140mm Fans) / Rifle Bearing (120mm Fans)
  • Fan support (Top): 2x 140mm / 3x 120mm
  • Fan support (Side): 3x 120mm
  • Fan support (Bottom): 1x 140mm / 1x 120mm
  • Fan support (Side): 2x 120/140mm
  • Fan support (Bottom): 3x 120
  • Fan support (Rear): 1x 120
  • Fan Power Connector Type: 4-pin PWM
  • Radiator support (Top): 120 / 140/ 180/ 240 / 280/ 360mm
  • Radiator support (Side): 120 / 140/ 240 / 240/ 280mm
  • Radiator support (Rear): 120mm
  • PSU form factor: ATX PS/2
  • Max PSU length (mm): 190
  • Max GPU length (mm): 420
  • Max cooler height (mm): 175
  • Drive Bays: [3.5 “] 5x Internal [2.5”] 8x Internal
  • Dimensions (L x W x H), (mm): 475 x 300 x 442
  • Fan PWM/RGB Controller: Yes (10x 4-pin & 10x ARGB Gen 2)
  • I/O Panel: 2x USB 3.0, 1x USB 3.1 Gen 2 Type-C, 1x Headphone, 1x Microphone, 1x LED Button, 1xPower Button
  • Removable dust filters: 3x (Top, Bottom, Side), Front (if you use the mesh panel)
  • Expansion slots: 7x horizontal
  • Weight (kg): 11.85
  • Price (excluding VAT): $150
  • Warranty: 3-years
Pages ( 1 of 12 ): 1 23456789101112Next »

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *