Efficiency Normal, Light & Super-Light Loads
Efficiency is high on all load ranges.
Average Efficiency
The platform’s average efficiency is high.
Average PF
The APFC converter could use some tuning for higher PF readings at 230V.
Average Efficiency 5VSB
The 5VSB rail ideally should be close to 80% efficiency.
Vampire Power
Vampire power is increased, especially at 230V.
Pages:
My 9060XT 16GB graphics card has a typical board power (TBP) of 160W to 182W, which requires 13.3A to 15.2A of current. The card uses a 6+2 pin PCIe connector (600mm), but many power supplies use a mix of 16AWG and 18AWG wires for these connectors. Will the 18AWG wires be able to safely handle that much current?
3x gauges handle this current so it is ok.
please mate would you do a review Zalman Teramax II ATX 3.0 ?
will try to do so ok!
–“…and it managed to pass all tests”
Well, I see one red flag on the minor rail. If I’m counting it right, it’s just 0.42% out of 5% tolerance (5.42% under 3.3V)… or I miss something?