The ASRock SL-1200G is a high-power, ATX v3.1 PSU. In the Cybenetics efficiency and noise schemes it is certified as Platinum and LAMBDA-A, respectively. Read the full review to find out more about this product.
The ASRock SL-1200G is (or will be) included in my best ATX v3.x & PCIe 5.x PSU picks article.
ASRock is continuing its push into the PSU market, with two major OEMs behind the respective products, HEC and FSP. The SL-1200G is based on an HEC platform, which achieves Platinum efficiency and LAMBDA-A noise certifications in the Cybenetics standards. This PSU also has an ATX v3.1 pass by Cybenetics, meaning that it meets all requirements of this standard.
To keep the noise down, ASRock utilizes the fan-stop feature, which it calls iCool mode. Thankfully, you can deactivate it through a switch located at the unit’s front side. It is highly preferred to have a PWM-driven fan spinning at low speeds under light loads, to remove the heat from the PSU’s internals, rather than have the fan stopped and allow for heat build-up, which will need increased fan speed later to be removed. Till this happens, it will stress sensitive, heat-sensitive parts. Moreover, in fluid dynamic bearing fans, initial contact might occur between the bearing and the shaft at startup before the hydrodynamic pressure builds up.
Check out our top ATX v3.1 PSU guide before purchasing your next PSU.
High-Capacity ATX v3.1 PSU Reviews:
- ASUS ROG Thor 1200W Platinum III ATX v3.1 PSU Review
- Asus Rog Strix 1200W Platinum ATX v3.1 PSU Review
- be quiet! Dark Power Pro 13 1600W PSU Review
- Cooler Master X Silent MAX Platinum 1300W
- Cooler Master GX III 1250W ATX v3.0 PSU Review
- Corsair HX1200i ATX v3.1 (2025) PSU Review
- darkFlash UPMOST 1250W ATX v3.0 PSU Review
- Lian Li EG1200G ATX v3.1 PSU Review
- MSI MAG A1250GL PCIE5 ATX v3.1 PSU Review
- Montech Titan PLA 1200W ATX v3.1 PSU Review
- Montech Century II 1200W ATX v3.1 PSU Review
- NZXT C1500 ATX v3.1 PSU Review
- Seasonic Prime TX-1300 ATX v3.0 PSU Review
- Seasonic Prime PX-1600 ATX v3.0 PSU Review
- Seasonic Prime TX-1600 ATX v3.0 PSU Review
- SilverStone Hela 2500Rz ATX v3.1 PSU Review
- Super Flower Leadex 2800W ATX v3.1 PSU Review
- Super Flower Leadex Titanium ATX v3.0 1600W PSU Review
- Super Flower Leadex III 1300W ATX v3.1 PSU Review
- Thermaltake Toughpower GF3 1350W ATX v3.0 PSU Review
- Thermaltake Toughpower GF3 1650W ATX v3.0 PSU Review
- XPG Fusion 1600W Titanium PSU Review
- XPG Cybercore II 1300 Platinum PSU Review
- Manufacturer (OEM): HEC
- Max Power: 1200W
- Cybenetics Efficiency: [115V] Cybenetics Platinum (89.875%), [230V] Cybenetics Platinum (92.059%)
- Noise: Cybenetics A (20-25 dB[A])
- Compliance: ATX v3.1, EPS 2.92
- Operating Temperature (Continuous Full Load): 0 – 50 °C
- Alternative Low Power Mode support: Yes
- Power 12V combined: 1200W
- Number of 12V rails: 1
- Power 5V + 3.3v: 150W
- Power 5VSB: 15W
- Cooling: 135mm Fluid Dynamic Bearing Fan (RLAZ S1352512EH-3M)
- Semi-Passive Operation: ✓ (Selectable)
- Modular Design: Yes (Fully)
- High Power Connectors: 2x EPS (2x cables), 3x PCIe 6+2 pin (3x cables), 2x PCIe 12+4 pin (600W)
- Peripheral Connectors: 12x SATA (3x cables), 4x 4-pin Molex (1x cable)
- ATX Cable Length: 590mm
- EPS Cable Length: 640mm
- 12+4 pin PCIe Cable Length: 645mm
- 6+2 pin PCIe Cable Length: 650mm
- Distance between SATA/4-pin Molex: 120/110mm
- In-cable capacitors: No
- Dimensions (W x H x D): 150 mm x 85 mm x 140mm
- Weight: 1.85 kg (4.08 lb)
- Warranty: 10 years
- MSRP (excluding VAT): $188.44
Power Specifications
Rail | 3.3V | 5V | 12V | 5VSB | -12V | |
Max. Power | Amps | 25 | 25 | 100 | 3 | 0.3 |
Watts | 150 | 1200 | 15 | 3.6 | ||
Total Max. Power (W) | 1200 |
Aris would u update Gamemax Lioncore 1000/1200P series, i’ve seen they just had cybenetics platinum ratings
I will review them at some point. Their OEM is doing some serious effort to improve, and I try to help them (as I do with all the other OEMs who send me products for testing)
Love your work but could you in future articles explain every test with simple explanation? I always forget what’s what and have to go to your Tom’s HW reviews to check 😀
For example from the Hold up time segment there: “Put simply; hold-up time is the amount of time that the system can continue to run without shutting down or rebooting during a power interruption.”
If you could mention briefly at the beginning of each test that would be great. If it’s not hassle to paste it every time of course 🙂
I’m still rocking a 2019 Seasonic Focus GX which I picked based on Jonny Guru’s review and I’m afraid that it will die soon so started my research and I’m glad to see that there is a new Guru in the PSU review space so thank you for your work.
Also, your reviews now made me hesitant to buy Seasonic when the time is here lol hopefully they are still reliable even though they are now midrange in these tests
Will see what I can do about that 🙂 Thank you!
I really was hoping für the FSP Mega TI to be next in line…
FSP is still working on this…