Test Methodology
I use an LW-9266 Fan PQ performance measurement apparatus to evaluate cooling fans. This is a highly sophisticated scientific instrument made in Taiwan by Long Win.
Fan Testing Machine Technical Specifications:
- Manufacturer: Long Win Science & Technology Corporation
- Air Flow Rate: 2.4 – 250 CFM
- Accuracy of Air Flow Rage: <3.5% INFS
- Repeatability error: < 2%
- Static pressure: 0-20mmAq (100mmAq with the high static pressure throttle device)
- Overall Dimensions: 0.7 (W) x 2.2 (L) x 1.6 (H) m
- Power Source: 220VAC, 5A, Single Phase, 50/60Hz
- Based on Standards: ISO 5801-2007, AMCA 210-0, ASHRAE 51-2007, IEC 61591-2005, GB/T 1236-200
Besides the Long Win machine, I also use the following equipment.
Testing Equipment:
- Noise Test Environment: Hemi-Anechoic Chamber with 6 dB(A) noise floor
- Conditions: 25 (+-2) degrees Celsius, 40-50% humidity
- Sound Analyzer: Bruel & Kjaer 2270-S G4
- Microphone: Bruel & Kjaer Type 4955-A
- Mic Calibrator: Bruel & Kjaer Type 4231
- Data Logger: Picoscope TC-08
Pages:
Definitely DONNOT BUY THOSE FANS!
REASONS:
– L CONNECT doing nothing consumes 7% of your resources.
– each LCD screen consumes 3 to 7% of resources, especially animation or gauges. Only static images don’t consume.
– they seem to fail in under two years, when this happens replacing is a pain since they are interlocked.
When I turn all my screens to cpu gauge, it read 45% utilization just because of lian lis crappy software. 9950x, 4090, 192gb ram.
I even stopped buying their cases as a result, after 20 years of brand loyalty it evaporated due to these fans. L connect is a frankenstein as is their line of 30 incompatible unnecessarily diverse fan lines.
Amazing work! Thank you for this.
🙂
Great for when half your fans are oriented in a way where the display isn’t visible.