Thermaltake Toughpower PT 850 ATX v3.1 PSU Review

All Thermaltake PT models are built on the CWT (Channel Well Technology) CSA platform. They carry Cybenetics Platinum efficiency certification and are verified for ATX v3.1 compliance by the same agency. In this review, we’ll take a closer look at the smallest unit in the lineup—the 850W model.

The Thermaltake Toughpower PT 850 is (or will be) included in my best ATX v3.x & PCIe 5.x PSU picks article.

The Thermaltake Toughpower PT series includes three models, ranging from 850W to 1200W. Each unit holds a Cybenetics Platinum efficiency certification and is verified by the same agency for full ATX v3.1 compliance. To enhance the lineup’s appeal, Thermaltake has equipped these PSUs with Japanese capacitors, a hydraulic-bearing fan, and a fully modular cable design.

All PT models are rated for continuous full-load operation at 40°C, which is somewhat low for a high-end platform. In the 1200W and 1000W models, I didn’t account for this during testing, which pushed them above 45°C. In the 850W model, I applied up to 41°C during the normal tests; however, during protection feature evaluations, though, I significantly exceeded the rated loads and operating temperatures—driving the platform well past its limits until the protection circuits kick in to save it… or it fails spectacularly.

The MSRP prices of Thermaltake’s new PT series PSUs are listed below:


Check out our top ATX v3.1 PSU guide before purchasing your next PSU.

ATX v3.1 850W PSU Reviews:

Technical Specifications:
  • Manufacturer (OEM): CWT (CSA)
  • Max Power: 850W
  • Cybenetics Efficiency: [115V] Cybenetics Platinum (89.125%), [230V] Cybenetics Platinum (91.884%)
  • Noise: [115V] Cybenetics A++ (12.39 dB[A]), [230V] Cybenetics A++ (13.15 dB[A])
  • Compliance: ATX v3.1, EPS 2.92
  • Operating Temperature (Continuous Full Load): 0 – 40 °C
  • Alternative Low Power Mode support: ✓
  • Power 12V combined: 849.6W
  • Number of 12V rails: 1
  • Power 5V + 3.3v: 110W
  • Power 5VSB: 15W
  • Cooling: 135mm Fluid Dynamic Bearing Fan (CWT13525H12F-9)
  • Semi-Passive Operation: No
  • Modular Design: Yes (Fully)
  • High Power Connectors: 2x EPS (2x cables), 1x 12+4 pin (600W), 4x PCIe 6+2 pin (2x cables)
  • Peripheral Connectors: 6x SATA (2x cables), 4x 4-pin Molex (1x cable)
  • ATX Cable Length: 540mm
  • EPS Cable Length: 700mm
  • 12+4 pin PCIe Cable Length: 600mm
  • 6+2 pin PCIe Cable Length: 600mm
  • Distance between SATA/4-pin Molex: 150mm
  • In-cable capacitors: No
  • Dimensions (W x H x D): 150 mm x 85 mm x 140mm
  • Weight: 1.52 kg (3.35 lb)
  • Warranty: 10 Years
  • MSRP (excluding VAT): $130

Power Specifications

Rail 3.3V 5V 12V 5VSB -12V
Max. Power Amps 20 20 70.8 3 0.3
Watts 110 849.6 15 3.6
Total Max. Power (W) 850
Pages ( 1 of 11 ): 1 234567891011Next »

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *