Thermaltake Toughpower PF3 850W PSU Review

Efficiency Normal, Light & Super-Light Loads

The platform’s efficiency is high on all load ranges but 2%, where it cannot pass the 70% recommended, by the ATX spec, limit.

Average Efficiency

The platform’s average efficiency is high.

Average PF

The APFC converter needs tuning for higher PF readings at both voltage inputs.

Average Efficiency 5VSB

The 5VSB rail is efficient.

Vampire Power

Vampire power is low at 115V but goes above 0.1W at 230V.

Pages ( 7 of 11 ): « Previous123456 7 891011Next »

Related Posts

9 thoughts on “Thermaltake Toughpower PF3 850W PSU Review

  1. Hello, I am now faced with choosing a power supply. I’ve been looking at your tests for a long time because I’m interested in it, but I want to choose a certain unit for my computer. Previously, I had a Bitfenix Whisper M 750W, but unfortunately its fan failed and I had to send the power supply back under warranty and received a refund.
    I’m aiming for 750w/850w,
    I care about low ripple, Japanese capacitors, quiet fan operation and two wires on a single pcie cable to the GPU (I have rtx 2070).
    I don’t know whether to go with old units or ATX 3.0.
    My unit under full load (prime95 + furmark) consumes 400W from the socket.
    I have a maximum of EUR 140 to spend, I live in the EU.
    Can you recommend something to me?

      1. Thanks for the answer. You’re doing an amazing job. I think I’ll go with the RM750x/850x shift.
        Will there be a review of XPG Core Reactor II? I see it in the table, but there is no separate article.

      2. I’m still considering Deepcool PX850G and XPG Core Reactor II 850W. They are available in my country at an affordable price. Which one will be the best idea?

  2. How serious “problem” is the single cable for the 2 eps connectors? Do you think that the combination of a 7700x (or 7950x) and an asrock x670e steel legend would set this on fire? (No overcloking, only standard operation voltages. If it is an actual problem, then the next candidate is the rmx850 shift, are they equal? they seem so)

    1. In a single 12V rail it actually is. When both connectors can deliver more than 450W and take from a single PSU socket, all hell can break lose if something goes wrong.

Leave a Reply

Your email address will not be published. Required fields are marked *