Gamemax RGB-1050 Pro – 4.5 stars on Amazon!

Load Regulation

Test 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) Temps (In/Out) PF/AC Volts
10% 6.902A 1.982A 1.976A 0.979A 104.938 84.184% 1045 23.6 33.61C 0.958
12.074V 5.046V 3.34V 5.106V 124.647 37.87C 114.88V
20% 14.835A 2.975A 2.967A 1.178A 209.928 89.283% 1070 24.1 34.05C 0.992
12.067V 5.042V 3.337V 5.094V 235.123 38.63C 114.84V
30% 23.126A 3.472A 3.463A 1.377A 314.939 90.626% 1127 25.2 35.44C 0.991
12.059V 5.04V 3.335V 5.082V 347.518 40.49C 114.81V
40% 31.397A 3.97A 3.961A 1.578A 419.517 90.925% 1216 27.6 35.89C 0.993
12.049V 5.038V 3.332V 5.07V 461.388 41.40C 114.77V
50% 39.399A 4.966A 4.957A 1.779A 524.833 90.913% 1281 28.4 36.40C 0.994
12.039V 5.034V 3.329V 5.058V 577.293 42.31C 114.73V
60% 47.347A 5.964A 5.954A 1.982A 629.348 90.656% 1338 28.6 36.64C 0.994
12.029V 5.031V 3.326V 5.046V 694.211 43.15C 114.69V
70% 55.399A 6.963A 6.954A 2.185A 734.696 90.253% 1385 30.5 37.31C 0.995
12.014V 5.027V 3.322V 5.033V 814.036 44.34C 114.64V
80% 63.483A 7.964A 7.956A 2.289A 839.521 89.725% 1443 32.1 37.89C 0.995
11.997V 5.023V 3.318V 5.023V 935.662 46.02C 114.6V
90% 72.011A 8.464A 8.444A 2.393A 944.897 89.134% 1504 33.9 38.72C 0.995
11.977V 5.02V 3.316V 5.014V 1060.081 48.04C 114.55V
100% 80.505A 8.968A 8.965A 2.498A 1049.605 88.442% 1559 34.3 39.73C 0.994
11.954V 5.017V 3.313V 5.004V 1186.777 49.77C 114.52V
110% 88.726A 9.967A 10.055A 2.502A 1154.921 87.942% 1310 28.3 40.41C 0.994
11.937V 5.016V 3.312V 4.996V 1313.263 51.32C 114.49V
CL1 0.115A 15.03A 15.013A 0A 126.294 80.531% 1363 29.5 35.26C 0.977
12.074V 5.009V 3.304V 5.129V 156.829 40.79C 114.85V
CL2 0.115A 24.987A 0A 0A 126.245 78.871% 1352 28.8 35.13C 0.979
12.075V 4.997V 3.318V 5.131V 160.068 42.23C 114.84V
CL3 0.114A 0A 25.03A 0A 83.9 71.973% 1280 28.4 34.61C 0.932
12.075V 5.03V 3.297V 5.13V 116.575 43.64C 114.88V
CL4 87.778A 0A 0A 0A 1049.496 89.044% 1496 33.2 39.69C 0.995
11.956V 5.04V 3.325V 5.082V 1178.622 50.66C 114.53V

Load regulation should be within 1% at 12V, ideally close to 0.5% deviation. On the minor rails, load regulation is decent.

Ripple Suppression

Test 12V 5V 3.3V 5VSB Pass/Fail
10% Load 10.6 mV 14.1 mV 16.7 mV 8.4 mV Pass
20% Load 10.6 mV 14.1 mV 16.4 mV 8.5 mV Pass
30% Load 11.6 mV 15.3 mV 17.0 mV 8.7 mV Pass
40% Load 12.0 mV 14.0 mV 16.7 mV 9.0 mV Pass
50% Load 15.4 mV 15.1 mV 17.7 mV 9.2 mV Pass
60% Load 19.3 mV 16.0 mV 18.7 mV 9.4 mV Pass
70% Load 22.2 mV 15.8 mV 19.1 mV 9.8 mV Pass
80% Load 26.3 mV 15.4 mV 20.3 mV 11.1 mV Pass
90% Load 27.3 mV 15.7 mV 19.9 mV 12.1 mV Pass
100% Load 35.3 mV 18.6 mV 21.1 mV 13.9 mV Pass
110% Load 33.9 mV 21.8 mV 21.0 mV 13.7 mV Pass
Crossload 1 12.0 mV 18.4 mV 17.5 mV 10.9 mV Pass
Crossload 2 14.6 mV 27.6 mV 17.7 mV 10.1 mV Pass
Crossload 3 11.4 mV 15.5 mV 22.1 mV 10.3 mV Pass
Crossload 4 33.7 mV 16.9 mV 19.3 mV 13.9 mV Pass

Ripple suppression doesn’t stand out, but it is good enough. Ripple at 12V is lower at the 110% test than the full load test because the unit couldn’t complete the 110% load test. It shut down after one minute of load or so.

Pages ( 4 of 11 ): « Previous123 4 567891011Next »

Related Posts

6 thoughts on “Gamemax RGB-1050 Pro – 4.5 stars on Amazon!

  1. It woulb be nice if you can review the top of the line version, their 1300W. At 149$ USD and with the look … many jump on it too with 6,862 review 4.5 Stars.

  2. I should point out that Gamemax has done promotions in the past where they would offer gift cards in exchange for five-star reviews on Amazon, which dampens their credibility somewhat. Also, given that Jiu Meng is the manufacturer behind Aresgame, if this is a sample from the company and not a unit you bought yourself I am doubtful that what a consumer would get would be the same as what is shown here. Regardless, it’s good to see that they are at least capable of making a good PSU. Thanks for the review as always!

Leave a Reply

Your email address will not be published. Required fields are marked *