Transient Response
20% Load – 20ms
| Advanced Transient Response 20% - 50 Hz - No Caps | ||||
| Voltage | Before | After | Change | Pass/Fail |
| 12V | 12.051V | 11.862V | 1.56% | Pass |
| 5V | 5.107V | 4.991V | 2.27% | Pass |
| 3.3V | 3.355V | 3.243V | 3.35% | Pass |
| 5VSB | 5.055V | 5.016V | 0.77% | Pass |
50% Load -20ms
| Advanced Transient Response 50% - 50 Hz - No Caps | ||||
| Voltage | Before | After | Change | Pass/Fail |
| 12V | 12.027V | 11.944V | 0.69% | Pass |
| 5V | 5.087V | 4.992V | 1.88% | Pass |
| 3.3V | 3.333V | 3.208V | 3.74% | Pass |
| 5VSB | 5.024V | 4.985V | 0.77% | Pass |
The transient response with normal loads is good overall.
Transient Response ATX v3.1 Tests
The PSU passes all ATX v3.1 transient response tests, but the 3.3V rail drops below 3.2V in the 200% load test.
The 12V rail performs well in these tests.
Pages:
Hi, between FSP Vita 850w and XPG Core Reactor II 850W which one would you recommend?
The XPG is about $15 – $17 cheaper here
They have similar overall performance so I would get the one that is more affordable.
What about compared to Superflower Leadex vii Gold? It’s also about $17 – $20 more than XPG
Leadex is very good.
It’s now sold out everywhere in my region, alternative would be NZXT C850 for 230v? NZXT is $10 more than the XPG or the XPG might still be better choice?
I just got this PSU and am experiencing quite a bit of coil whine. Is this something you’ve had while performing your testing?
Thinking of either replacing my set or just living with it.
Nope if there are any coil whine issues, I mention them in the review. You should probably replace it.