Super Flower Leadex VII PRO 1000W ATX v3.1 PSU Review

Epilogue

The Super Flower Leadex VII PRO 1000W is currently sold for $230, so you cannot call it affordable. Nonetheless, a 1000W PSU is destined for a strong system equipped with expensive parts, so you should not go cheap on the PSU but buy a high-performance and reliable one. Remember that the PSU will be without for several system builds, aging much slower than other PC parts, including CPUs and GPUs.

The Leadex VII PRO 1000W achieves a decent overall performance, but it cannot threaten the competition from 1st Player, Asus, Corsair, and Montech. Even the Leadex VII XG 1000, at least the sample I evaluated, achieved a higher overall score. The not-so-good ripple suppression, mostly on the minor rails, the average transient response on the same rails, the increased vampire power consumption, the not-so-high PF readings at 230V, and the low-efficiency 5VSB rail cut performance points from the overall score. On the other hand, the platform achieves high average efficiency, it has extra-tight load regulation on all major rails, the 12V rail’s transient response is good, especially in the “heavy” ATX v3.1 test scenarios and the hold-up time is way longer than the required. On top of that, the PSU is equipped with many cables and connectors, and its dimensions are compact, thanks to the 150mm depth. Despite the compact dimensions, there is plenty of room between the platform’s components for good airflow, and the high efficiency also helps keep the noise output because it lowers the thermal loads. The average noise output is high, at nearly 35 dBA, but the PSU’s fan goes wild at high loads. The PSU operates quietly at light and moderate loads, with its fan’s passive operation lasting long.

I would like to see some issues resolved since they are significant and belong to the protection features segment. To effectively protect the PSU, the 12V OCP and OPP triggering points should be further apart under cold and hot conditions, and the inrush currents have to be lowered by using a larger NTC thermistor or by installing an additional one to increase the total impedance.

The Super Flower Leadex VII Pro 1000W is a good power supply, but its price doesn’t help it achieve a high performance-per-price ratio. Super Flower should either improve performance, which I believe is possible for its team, or drop the unit’s price below 200 dollars to make it more attractive.

 

Before investing in a new power supply, read my Best ATX v3.x PSUs article to check all alternative PSU offerings. You help me a lot by using my affiliate links, which don’t increase the product’s price. I get a commission from Amazon every time you do it, which can make a difference for me, especially now that I am on my own, working exclusively for my media and not for someone else.

 

 

 

Pros:
  • Delivered full power at 47°C
  • High average efficiency
  • Decent overall performance
  • ATX v3.1 and PCIe 5.1 ready
  • High build quality
  • Good transient response at 12V
  • Extra tight load regulation
  • Extra long hold-up time
  • Quiet operation at light and moderate loads
  • Alternative Low Power Mode (ALPM) compatible
  • FDB fan
  • Fully modular
  • Many cables and connectors, including a high-power one (12+4 pin, 600W)
  • Long enough distance (150mm) between the 4-pin Molex connectors
  • Compact dimensions (150mm depth)
Cons:
  • Expensive
  • 12V OCP and OPP triggering points need to be set lower at high operating temperatures
  • Sky-high inrush currents at 230V
  • Ripple suppression could be better on the minor rails
  • The fan speed profile should be less aggressive at high loads
  • APFC converter needs tuning for higher PF readings at 230V
  • Not efficient 5VSB rail
  • High vampire power
Pages ( 11 of 11 ): « Previous12345678910 11

Related Posts

10 thoughts on “Super Flower Leadex VII PRO 1000W ATX v3.1 PSU Review

  1. θα μπορούσατε να μου πείτε από που μπορώ να αγοράσω αυτό το τροφοδοτικό? Προορίζεται για radeon rx 7900xtx και 7800x3d

    1. Δυστυχώς η Super Flower δεν έχει ακόμη distributor στην Ευρώπη. Ρίξε μια ματιά στην Caseking αν το φέρνει.

  2. Hi,

    On page 2 (Box & Bundle, Product Photos & Cables), statement “The modular panel around the back hosts thirteen sockets. Since the PSU doesn’t have a native 12V-2×6 socket, it is automatically ATX v3.1 compliant if it meets the ATX v3.0 requirements.” is confusing to me.

    This statement confuses me because it reads, this PSU is ATX 3.1 compliant since it does not have 12v-2×6 socket.

    1. it means that any PSU that doesn’t have the native 12V-2×6 but uses 2x 8 pin sockets instead AND meets ATX v3.0 spec requirements, automatically meets the ATX v3.1 specs.

      While PSUs with 12VHPWR are NOT since they need the native 12V-2×6. Some brands were smart and used 2x 8 pins (e.g. Corsair, Super Flower) so they didn’t have to make any changes to make their PSUs ATX v3.1 ready.

      1. Hello, could there be an error in the characteristics? What is the correct full-bridge or hall-bridge topology?
        thank you and greetings

Leave a Reply

Your email address will not be published. Required fields are marked *