Lian Li EG1000G ATX v3.1 PSU Review

Efficiency Normal, Light & Super-Light Loads

Efficiency is high enough at normal loads at both voltage inputs but average at light loads. It exceeds 70% with a 2% load.

Average Efficiency

Like the 1200W model, the average efficiency is notably higher at 230V than at 115V.

Average PF

The APFC converter performs well.

Average Efficiency 5VSB

The 5VSB rail’s efficiency is high enough.

Vampire Power

Vampire power is low.

Pages ( 7 of 11 ): « Previous123456 7 891011Next »

Related Posts

5 thoughts on “Lian Li EG1000G ATX v3.1 PSU Review

  1. hello Aris based on your tier list which is better Unicon or Toshin Kogyo caps or it’s just on a same level ?

      1. so between TK LGW/LGWA/LGWB with TK LW/LFW/LFWB/LCW what’s different, i look at TK website there are no TK LW/LFW/LFWB/LCW on that product list but i’ve seen some cheap power supply with japan capacitor gimmick use these caps, so do they had real lifetime performance similar to LGW/LGWA/LGWB product or similar to other chinese caps like LTEC or ChengX ?

    1. Hi, I was wondering if you could answer some questions that I have concerns about. I recently purchased this psu Lian Li Edge 1000w gold and installed it in my rig to power an rtx 5080.
      With all these issues of 12vhpwr cables melting, I decided to check my 12v core voltages on hwinfo and noticed that this psu is showing readings of about 11.8v for PCIe and 16-pin, and would dip to as low as 11.6v under load.
      I’ve tried checking all the cables and made sure they’re seated properly to avail.
      Am I being too paranoid or do these reading look abnormally low. Should I submit and RMA and return the product?

Leave a Reply

Your email address will not be published. Required fields are marked *