Protection Features
| OCP (Cold @ 28°C) | 12V: 67A (123.84%), 12.043V 5V: 29.6A (148%), 5.036V 3.3V: >28A (>140%), <3.136V 5VSB: 5A (166.67%), 4.895V |
| OCP (Hot @ 43°C) | 12V: 66.4A (122.74%), 12.077V 5V: 28.2A (141%), 5.049V 3.3V: 30.5A (152.5%), 3.136V 5VSB: 5A (166.67%), 4.884V |
| OPP (Cold @ 28°C) | 794.83W (122.28%) |
| OPP (Hot @ 43°C) | 794.8W (122.28%) |
| OTP | ✓ (120°C @ secondary side) |
| SCP | 12V to Earth: ✓ 5V to Earth: ✓ 3.3V to Earth: ✓ 5VSB to Earth: ✓ -12V to Earth: ✓ |
| PWR_OK | Proper operation |
| NLO | ✓ |
| Fan Failure Protection | ✗ |
| SIP | Surge: MOV Inrush: NTC Thermistor |
OCP is set below 130% at 12V, but its triggering points are close in cold and hot conditions, which is incorrect. OCP is highly set at 3.3V, especially at high temperatures. This is a fine way to destroy the PSU! The same goes for the 5V rail, but at least at high temperatures, OCP’s triggering point drops notably.
The over power protection is conservatively set, but I would like to see a lower trigger point at high temperatures. Lastly, all other essential protection features are present.
Pages:
