Sharkoon Rebel P20 SFX 1000W ATX v3.1 PSU Review

Epilogue

The Rebel P20 SFX 1000 is a high-power, small-factor PSU that faces strong competition, mostly from the Corsair SF1000 unit. Currently, this Sharkoon unit is not available in the US market, and in the EU, it costs 200 euros, which is a pretty stiff price. Currently, Corsair’s flagship SF1000 unit goes for about 25 euros more in the EU market, not leaving many chances for the P20 SFX 1000 to have a successful sales career. Sharkoon should drastically change its pricing scheme in this SFX model if it wants to boost its sales. Currently, the P20 SFX 1000 is too expensive for what it has to offer. Moreover, at this price point, I would like to see a higher quality fan, for instance, a Hong Hua one, instead of the mediocre quality Globe Fan model used. Nonetheless, the rest of the parts are of high quality, and the same goes for the soldering quality, which is good.

Performance-wise, efficiency needs boosting, especially at light loads; load regulation needs to get tighter, and the same goes for the unit’s transient response. A larger NTC thermistor would help bring the inrush currents to lower levels, and more filtering caps on the secondary side would improve ripple suppression at 12V. Vampire power also needs to get lower, mostly at 230V. On the other hand, ripple suppression is good on the minor rails, the APFC converter achieves high performance, the 5VSB rail is efficient, and the PSU’s noise output remains below 25 dBA at up to 700W loads. Don’t expect a high-power, small-form-factor PSU to be dead quiet. If silence is a priority for you, then an ATX PSU is preferable, given that your chassis can accommodate it.

The Rebel P20 SFX 1000 needs a price update to remain in the game. The ideal price would be notably below the 200 euros mark. I do not know if Sharkoon can work with Sirfa to make this happen.

Before investing in a new power supply, read my Best ATX v3.x PSUs article to check all alternative PSU offerings. You help me a lot by using my affiliate links, which don’t increase the product’s price. I get a commission from Amazon every time you do it, which can make a difference for me, especially now that I am on my own, working exclusively for my media and not for someone else.

Pros:
  • Delivered full power at 47°C
  • Increased power density
  • ATX v3.1 and PCIe 5.1 ready
  • Decent transient response at 12V (ATX v3.1 test scenarios)
  • Conservatively set OCP triggering points on the minor rails
  • Within 1% regulation at 3.3V
  • Good ripple suppression on the minor rails
  • Quiet enough operation at up to 700W load
  • Efficient 5VSB rail
  • High APFC converter’s performance
  • Alternative Low Power Mode (ALPM) compatible
  • Good build quality (except for the fan)
  • Fully modular
  • Enough cables and connectors, including a high-power one (12+4 pin, 600W)
  • Long enough distance (150mm) between the peripheral connectors
Cons:
  • Expensive at 200 euros
  • 12V OCP and OPP protection features need adjustments
  • Mediocre transient load response (normal loads)
  • Efficiency needs boosting
  • Ripple at 12V should be below 40mV at full load
  • High inrush currents
  • Lower than 70% efficiency with a 2% load
  • Increased vampire power
  • Only a single 4-pin Molex (adapter) is provided
Pages ( 11 of 11 ): « Previous12345678910 11

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *