Transient Response
20% Load – 20ms
| Advanced Transient Response 20% - 50 Hz - No Caps | ||||
| Voltage | Before | After | Change | Pass/Fail |
| 12V | 12.152V | 12.016V | 1.11% | Pass |
| 5V | 5.041V | 4.943V | 1.94% | Pass |
| 3.3V | 3.332V | 3.165V | 5.00% | Pass |
| 5VSB | 5.058V | 5.019V | 0.77% | Pass |
50% Load -20ms
| Advanced Transient Response 50% - 50 Hz - No Caps | ||||
| Voltage | Before | After | Change | Pass/Fail |
| 12V | 12.126V | 11.999V | 1.05% | Pass |
| 5V | 5.031V | 4.910V | 2.42% | Pass |
| 3.3V | 3.323V | 3.149V | 5.25% | Pass |
| 5VSB | 4.993V | 4.932V | 1.21% | Pass |
The transient response is decent since it is close to 1%, but the competition is tough in this section. In both tests, I would like to see a lower voltage drop at 3.3V, which drops well below the 3.2V mark.
Transient Response ATX v3.1 Tests
The PSU passes all ATX v3.1 transient response tests.
The 12V rail performs well here, achieving third place in the 200% load test.
Pages:
It is worth adding to the disadvantages only a 2-year warranty. That’s funny.
Nope, I won’t fall in the warranty pit ever again. Only if it is one year I will mention it.