Efficiency Normal, Light & Super-Light Loads
Efficiency is high enough at normal loads but not that high at light loads. Lastly, the PSU passes 70% efficiency with a 2% load, which the ATX v3.1 spec recommends.
Average Efficiency
The average efficiency barely meets the corresponding Cybenetics Platinum requirement at 115V (the low limit is 89%), and it has more headroom at 230V (the low limit is 91%). Overall, the average efficiency levels are satisfactory.
Average PF
The APFC converter needs tuning for higher power factor readings.
Average Efficiency 5VSB
It would be nice if the 5VSB rail’s average efficiency exceeded 80% at 230V.
Vampire Power
Vampire power should be lower at 230V.
Pages:
Bad fan profile settings. Initial fan speed is too high, 940 rpm is loud. It was better before.
https://photo.coolenjoy.co.kr/data/editor/2407/13c9e3cc800d2e5e3c3cf5bafd2b5b87dcd6a2cb.jpg Aris i’ve seen this PSU and find this cybenetics QR on this PSU, did this MAXWELL Duke officialy tested by Cybenetics labs, how it’s perform ?
Nope, I don’t remember testing this unit! Basically I never heard of this brand before. Hmm, I will investigate this.
i’ve seen that the Maxwell Duke 1000W internals looks like 1stplayer NGDP 1000W https://photo.coolenjoy.co.kr/data/editor/2407/647933e3d3d50b746a68c7235da86ad64c5491bb.jpg this is your tearing down the ngdp 1000w https://hwbusters.com/wp-content/uploads/2023/09/top1-2.jpg
This new series is a disappointment