Average Noise
The PSU’s average noise output is low.
Fan Noise & Speed Maps @ 28-32 °C – 115V
At up to around 490W, the fan’s noise remains below 20 dBA, and it is under 25 dBA at up to 600W at 12V. The 30 dBA mark is passed at around 745-770W.
Fan Noise & Speed Maps @ 28-32 °C – 230V
At 230V input, the fan’s noise exceeds 20 dBA sooner at 450W and 25 dBA at 640W. The region with over 30 dBA is notably smaller than at 115V input.
Pages:
Bought this psu after reading this review. My only concern is that my unit have coil whine when on idle from time to time.
Check if the coil whine is from the PSU or other parts in your system. It also has to do with the situation, for example in some game menus where FPS are unlimited, it is natural to have coil whine (from the GPU)
What about compare to hydro g pro series? Is there significant difference in term of quality and performance?
Hi, between FSP Vita 850w and XPG Core Reactor II 850W which one would you recommend?
The XPG is about $15 – $17 cheaper here
They have similar overall performance so I would get the one that is more affordable.
What about compared to Superflower Leadex vii Gold? It’s also about $17 – $20 more than XPG
Leadex is very good.
It’s now sold out everywhere in my region, alternative would be NZXT C850 for 230v? NZXT is $10 more than the XPG or the XPG might still be better choice?
I just got this PSU and am experiencing quite a bit of coil whine. Is this something you’ve had while performing your testing?
Thinking of either replacing my set or just living with it.
Nope if there are any coil whine issues, I mention them in the review. You should probably replace it.