Protection Features
| OCP (Cold @ 23°C) | 12V: 57A (123.91%), 11.408V 5V: >20.5A (>102.5%),< 4.75V 3.3V: >28.5A (>142.5%),< 3.18V 5VSB: 3.3A (132%), 5.004V |
| OPP (Cold @ 25°C) | 765.69W (127.61%) |
| OTP | ✓ (105°C @ 12V Heat Sink) |
| SCP | 12V to Earth: ✓ 5V to Earth: ✓ 3.3V to Earth: ✓ 5VSB to Earth: ✓ -12V to Earth: ✓ |
| PWR_OK | Accurate but lower than 16ms |
| NLO | ✓ |
| SIP | Surge: – Inrush: – |
The over current protection (OCP) triggering point is set correctly at 12V, not allowing the PSU to drop below 11.4V. However, this is not the case for the minor rails where OCP allows for low voltages. I didn’t push the unit more in these tests because it would fail and it could damage my equipment. The pleasant surprise is over-temperature protection (OTP), something missing from most budget units. Lastly, surge and inrush current protections are not included.
Pages:
In the pro and cons section you mention that it has both high build quality and low build quality. which one is it?
I left an error on purpose to see who would notice 😀
Bad build quality