Box & Bundle
The large box provides good protection. A smaller box inside hosts all accessories and cables. The rich bundle includes velcro straps, zip ties, fixing bolts, an OCK slot bracket with a switch, and an OCK jumper. The OCK parts combine all 12V rails into one, making cable configuration easier since users don’t have to worry about which rail goes where.
The PSU’s exterior looks nice and feels like an expensive product. The fan and exhaust grilles are restrictive, though, not allowing for optimal airflow.
|Description||Cable Count||Connector Count (Total)||Gauge||In Cable Capacitors|
|ATX connector 20+4 pin (600mm)||1||1||18-22AWG||No|
|4+4 pin EPS12V (700mm)||1||1||16AWG||No|
|8-pin EPS12V (700mm)||1||1||16AWG||No|
|2x 6+2 pin PCIe (600mm)||2||4||16-18AWG||No|
|12+4 pin PCIe (600mm) (600W)||1||1||16-28AWG||No|
|SATA (600mm+150mm) / 4-pin Molex (+150mm+150mm)||1||2 / 2||18AWG||No|
|AC Power Cord (1360mm) – C13 coupler||1||1||18AWG||–|
Two EPS connectors on dedicated cables, four PCIe 6+2 pin on two cables, a single 12VHPWR set at 600W, thirteen SATA, and only two 4-pin Molex connectors. There should be more 4-pin Molex connectors, three or even better four, available. Lastly, all cables are long, and the distance between the peripheral connectors is adequate at 150mm.