Thermalright TL-C12B V2 120mm Fan Review

Test Methodology

I use an LW-9266 Fan PQ performance measurement apparatus to evaluate cooling fans. This highly sophisticated scientific instrument was made in Taiwan by Long Win.

Fan Testing Machine Technical Specifications:
  • Manufacturer: Long Win Science & Technology Corporation
  • Air Flow Rate: 2.4 – 250 CFM
  • Accuracy of Air Flow Rage: <3.5% INFS
  • Repeatability error: < 2%
  • Static pressure: 0-20mmAq (100mmAq with the high static pressure throttle device)
  • Overall Dimensions: 0.7 (W) x 2.2 (L) x 1.6 (H) m
  • Power Source: 220VAC, 5A, Single Phase, 50/60Hz
  • Based on Standards: ISO 5801-2007, AMCA 210-0, ASHRAE 51-2007, IEC 61591-2005, GB/T 1236-200

Besides the Long Win machine, I also use the following equipment.

Testing Equipment:
  • Noise Test Environment: Hemi-Anechoic Chamber with 6 dB(A) noise floor
  • Conditions: 25 (+-2) degrees Celsius, 40-50% humidity
  • Sound Analyzer: Bruel & Kjaer 2270-S G4
  • Microphone: Bruel & Kjaer Type 4955-A
  • Mic Calibrator:  Bruel & Kjaer Type 4231
  • Data Logger: Picoscope TC-08
Pages ( 3 of 10 ): « Previous12 3 45678910Next »

Related Posts

3 thoughts on “Thermalright TL-C12B V2 120mm Fan Review

  1. The TL-C12C you mentioned in the end is a different, cheaper fan.
    TL-C12C turns clockwise and turrns a little faster in max. Also they have other rubber pads.

    TL-C12B turns counter clockwise.

    The TL-C12B is available as ARGB variant TL-C12B-S V3 at Amazon as X3 Pack
    for around 15€. Works very good on my Phantom Spirit EVO.

  2. Hi juste to remind you about the NF-A14 industrialPPC 😅 and if you can ask Silverstone for review the new FHS 140X 😊
    .

Leave a Reply

Your email address will not be published. Required fields are marked *