Frequency Plots
10% Fan Speed
The peak frequency is at 20 KHz. I also noticed increased noise in this frequency, in the Freezer III 280.
20% Fan Speed
Peak frequency: 20 KHz.
30% Fan Speed
- Peak frequency: 20 KHz
- Peak frequency range: 160 – 800 Hz
40% Fan Speed
- Peak frequency: 20 KHz
- Peak frequency range: 160 – 800 Hz
50% Fan Speed
- Peak frequency range: 160 – 1250 Hz
60% Fan Speed
- Peak frequency range: 160 – 2500 Hz
70% Fan Speed
- Peak frequency range: 250 – 2500 Hz
80% Fan Speed
- Peak frequency range: 250 – 2500 Hz
90% Fan Speed
- Peak frequency range: 250 – 2250 Hz
100% Fan Speed
- Peak frequency range: 250 – 2250 Hz
Signal Recordings
I have recorded the signals shown above, but please keep in mind that I’ve enabled Automatic Gain Control (AGC) to do so to make it easier for you to reproduce them. The provided recordings are only offered for aural identification purposes.
10% Fan Speed
20% Fan Speed
30% Fan Speed
40% Fan Speed
50% Fan Speed
60% Fan Speed
70% Fan Speed
80% Fan Speed
90% Fan Speed
100% Fan Speed
Pages:
There is unexpectedly a chart on page 5 about a different AIO with different numbers.
will check it, thanks!
Prices aside, what is the best AIO to use with the Phanteks T30 (that is, changing its fans), for low noise?
One with a large radiator. I would go for the Cooler Master Atmos 360.