The N80 from Gamemax is a game-changer! A unique dual-compartment design with modern looks and six ARGB fans, ready to host the coolest system. Is this chassis all show or is there more to it? Let’s cut to the chase!

Gamemax N80 is newly released!

Unboxing and First Impressions

The N80 arrives well-packaged inside its cardboard box, with extra cardboard corner pieces. In addition to the foam cutouts, additional foam pieces surround it, ensuring all components are secure during transit. The bundled accessories are in a small white cardboard box in the lower compartment. You will also find a remote control for the RGB fan controller there.

The striking visual appearance of the chassis leaves a positive first impression. The split between the lower and upper compartments elegantly hides some of the extra height this design provides.

Design and Build Quality

The N80’s design is unique. Its dual chamber design separates the PSU and HDD from the rest of the system, placing them below the main compartment, not behind it. This split provides a visual break, making the case appear less tall than it is while removing the PSU’s heat from the main compartment.

A single metal part covers the motherboard’s backside and the top. Remove the two screws from the back and unclip it from the top to get this panel off. It may require some man-handling to align it and place it back. The bottom PSU compartment has a separate metal piece that clips in place, which is a bit flimsy since it has no support in the middle.

The wrap-around glass is of good quality, and the bend is very nicely created. To remove it, you unclip it from the front plastic clips, slide it a bit forward (there is a rail on the side to keep it in place), tilt it slightly, and lift it. This is a straightforward and elegant mechanism that holds the glass firmly in place.

Moreover, there are two magnetic dust filters, one on top and one on the side intake. An additional dust filter can be found on the bottom, protecting the PSU from dust; however, there is no fan between the lower and upper compartments. As the bottom fans of the upper compartment are set for intake, lots of dust will be introduced in the chassis.

The lower chamber houses the I/O on the glass side toward the front. The other sides have a very nice design to allow for as much airflow as possible. However, as it is separate from the rest of the system, it has no fans. This is not necessarily bad, as there is no direct transfer of hot air between the PSU and the other components. An additional non-magnetic dust filter sits on the bottom to keep dust from your PSU.

Lastly, the PCIe expansion slots are bridge-less, so you can easily adapt vertical GPU brackets from Gamemax or a third party that fits the dimensions.

Compatibility and Space Utilization

This case supports ATX, Micro-ATX, Mini-ITX motherboards, back-connector boards like ASUS BTF, and similar designs. Being compatible with backward connector motherboards, makes it even easier to have a clean build. Ensure your PSU cable connectors fit in the space (32mm) behind the motherboard.

It accommodates most high-performance components, with room for GPUs up to 415mm long and CPU coolers up to 175mm in height. A vertical GPU mount is an option, enhancing both airflow and aesthetics.

The cable management was generally okay with our build, but there was little room to spare. Despite managing the cables, we had to hold the panel in place and then screw on the thumbscrews.

Cooling and Airflow

This chassis supports multiple fan and radiator configurations, with mounts for up to nine fans and compatibility for radiators up to 360mm. Inside the box, you will find six pre-installed fans. Five are of the reverse type (FN12A-N2-R), and the rear exhaust fan is of the standard type (FN12A-N2). They have integrated RGB lights, not on the fan blades but around them, similar to the Lian Li Uni Fan SL.

All fans are connected to the included fan hub. This hub uses a green PCB that’s a bit off, but in the end, you won’t see it after you assemble the system. Unfortunately, this PCB is necessary because the fans use propriety connectors. You cannot connect them directly to the mainboard or another fan controller. If you want to install additional fans, you must install them on the mainboard.

You will have no problem installing AIOs up to 360mm on the top or replacing the side intake fans with a 240mm radiator. You may also install one on the bottom, but you will have to use long screws from the top to mount it, as there is not the option of bottom access. The top panel is also not removable.

Storage Options

You will find a removable storage drive bay on the lower chamber, with two plastic drive trays. The trays feel flimsy and may easily break, but you may use them for either 2.5″ or 3.5″ drives, as there are provisions for both.

In addition to these two, you will also find some slots behind the motherboard, in which you may place 2.5″ drives after fitting them with the silicon feet provided in the bundle. However, if you decide to do so, it will get too crowded, and you may have issues closing the hinged panel and containing all the cables.

Build Experience

Building inside the N80 was pretty easy as it is spacious and deep. Installing the motherboard required loosening the fan a bit, but other than that, it was trouble-free. If you forgot something, there is enough space above the motherboard to plug in cables later. The space behind the motherboard seemed adequate, but in the end, some force was required to close the panel and replace the screws that keep it closed.

ARGB Lighting and Aesthetics

The N80’s lighting is a standout feature, with pre-installed fans and an integrated controller offering a variety of customizable effects. The lighting can be synchronized with popular software like ASUS Aura Sync, MSI Mystic Light, or Gigabyte RGB Fusion. Combined with the wrap-around tempered glass panel, the case provides a stunning platform for showcasing your hardware and lighting setup. There is also the option of the remote, included in the box.

Official Technical Specifications:
  • Model Name: N80
  • Case Type: Midi-ATX
  • Materials: Tempered glass, Steel, Plastic
  • Available Colors: Black, White
  • Motherboard compatibility: ATX (back-connect), mATX, ITX
  • Included fans: 6 x 120mm
  • Fan support (Side): 2x 120mm
  • Fan support (Rear): 1x 120mm
  • Fan support (Top): 3x 120mm / 3x 140mm
  • Fan support (Bottom): 3x 120mm
  • Radiator support (Side): 120 / 240mm
  • Radiator support (Rear): 120mm
  • Radiator support (Top): 120 / 140 / 240 / 280 / 360mm
  • Radiator support (Bottom): 120 / 140 / 240 / 280 / 360mm (Screw only from inside the chassis)
  • PSU form factor: ATX
  • Max PSU length (mm): N/A (can fit even the longest units).
  • Max GPU length (mm): 415
  • Max cooler height (mm): 175
  • Drive Bays: 2 x 2.5″ and 2 x 3.5″
  • Dimensions (L x W x H), (mm): 439 x 240.5 x 530
  • Fan PWM/RGB Controller: Yes
  • I/O Panel: 1x USB 3.1 Gen 2 Type-C, 1x USB 3.0, 1x Combo Jack, 1x Power Button
  • Removable dust filters: 2x (Side, Top)
  • Expansion slots: 7x
  • Weight (kg): 10.85kg
  • Price: about $169.99 ($131.97 from Newegg at the time of writing)
  • Warranty: 3-years
Pages ( 1 of 4 ): 1 234Next »

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *