Montech Titan Gold 1000W PSU Review

The Montech Titan Gold 1000W registers high performance, it is not noisy and it has a 12VHPWR connector. The most important of all, it passes all ATX v3.0 transient response tests, so it won’t have a problem powering the existing and upcoming graphics cards. 

Montech puts lots of effort into entering more into the PSU market, and its new Titan Gold line is a fine example. It includes three members with capacities ranging from 850W to 1200W and Cybenetics Gold efficiency ratings. The Titan Gold has strong competition, including the Corsair RMx and RMx Shift units, the EVGA G7 line (up to 1000W), the Asus Rog Strix Aura gaming, and Thermaltake’s fresh GF3 models. From the aforementioned lines, only the RMx (so far, at least) and the G7 lines don’t have ATX v3.0 compatibility and lack 12VHPWR connectors.

All Montech Titan Gold units are made by CWT, utilizing a slightly modified CSZ platform. This specific platform is highly popular since it offers ATX v3.0 compatibility and good performance without breaking the bank. This is why Thermaltake chose it for its GF3 line, in the models with up to 1200W capacity.

Cybenetics Report

 

Technical Specifications:
  • Manufacturer (OEM): CWT
  • Max Power: 1000W
  • Cybenetics Efficiency: [115V] Gold (87-89%)
  • 80 Plus Efficiency: Gold
  • Noise: Cybenetics Standard++ (30-35 dB[A])
  • Compliance: ATX12V v3.0, PCIe 5.0, EPS 2.92
  • Alternative Low Power Mode support: Yes
  • Power 12V: 1000W
  • Power 5V + 3.3v: 120W
  • Power 5VSB: 15W
  • Cooling: 135mm Fluid Dynamic Bearing Fan (HA13525H12SF-Z)
  • Semi-Passive Operation: Yes (selectable)
  • Modular Design: Yes (Fully)
  • High Power Connectors: 2x EPS (2x cables), 4x PCIe 6+2 pin (2x cables), 1x PCIe 12+4 pin (600W)
  • Peripheral Connectors: 12x SATA (3x cables), 4x 4-pin Molex (single cable)
  • ATX/EPS Cable Length: 600/700mm
  • Distance between SATA connectors: 150mm
  • Distance between 4-pin Molex connectors: 120mm
  • In-cable capacitors: No
  • Dimensions (W x H x D): 150 mm x 85 mm x 160 mm
  • Weight: 1.85 kg (4.08 lb)
  • Warranty: 10 years
Pages ( 1 of 11 ): 1 234567891011Next »

Related Posts

9 thoughts on “Montech Titan Gold 1000W PSU Review

  1. Thankyou for your response.

    I think I will go with Deepcool PX850G as it seems a good unit according to your review/testing (the 850W Montech Titan is £50 more expensive currently here in the UK).

    Thanks for your hard work, love what you do.

    Kind regards

  2. Hi Aris

    Should the fact that this PSU failed one of your tests (transient response – 50% load, 3.3V) be of concern? And what does this mean in regards to everyday use for the average user.

    Kind regards

    1. The 3.3V rail is only lightly used by today’s PSUs, so it most likely won’t be a serious issue. But in any case, it would be better if it passed this test with success.

  3. Hey Aris.
    What do you think about Antec Signature line up?
    I’m considering 1000w titanium or 1300w platinum unit. The price is decent here in Croatia. I saw your review of titanium unit back in 2020 and your opinion was positive!

  4. Thanks for this review Aris!

    Really strong showing, solid performance, here , from Montech. I didn’t expect that from an “outsider” .
    With this, they are becoming a competitive option.

    I PARTICULARLY liked the 150mm distance between the sata power connectors, FINALLY someone is listening and getting this thing right!
    It sets is apart from the competition in my book.
    Short distance between the sata can be frustrating even in midi cases.

    That said, needs a little improvement here and there, but there’s nothing outright wrong with it.

    1. It depends, if you need the side panel of the Shift. If not, you could save some money with the Montech unit since its normal price is around 170 dollars.

Leave a Reply

Your email address will not be published. Required fields are marked *