Box & Bundle
I got an early sample without the retail packaging, so I only have to show you a photo of the provided cables.
Product Photos
The PSU is compact, with only 140mm depth. The fan grille is not restricted, using the same design as the non-VE models. On the front side, you will only find the AC receptacle and the power switch since there is no semi-passive mode; hence, there is no need for a corresponding switch. I have to say here that I agree with XPG’s decision to ditch the semi-passive operation since it is way better to have the fan spinning at low speeds under light loads, without making any noise, rather than starting at higher speeds, making its presence felt.
Cables
Modular Cables | ||||
Description | Cable Count | Connector Count (Total) | Gauge | In Cable Capacitors |
---|---|---|---|---|
ATX connector 20+4 pin (650mm) | 1 | 1 | 18AWG | No |
4+4 pin EPS12V (750mm) | 2 | 2 | 18AWG | No |
6+2 pin PCIe (550mm) | 3 | 3 | 18AWG | No |
12+4 pin PCIe (600mm) (600W) | 1 | 1 | 16-24AWG | No |
SATA (440mm+150mm+150mm) / 4-pin Molex (+150mm) | 2 | 6 / 2 | 18AWG | No |
AC Power Cord (2380mm) – C13 coupler | 1 | 1 | 17AWG | – |
The VE edition has fewer cables than the non-VE, but still, the provided cables are enough to deliver the PSU’s full power without any issues. All cables are flat and stealthy, and no in-cable caps are used, which is the preferred method.