Efficiency Normal, Light & Super-Light Loads
The PSU’s efficiency is high at normal loads and high enough at light and super-light loads.
Average Efficiency
The platform’s average efficiency is high. With higher efficiency at light and super-light loads, it would be close to the Micronics unit, which is in the Titanium category.
Average PF
The APFC converter operates well enough at 115V, but there is room for improvement at 230V.
Average Efficiency 5VSB
The 5VSB rail achieves decent efficiency.
Vampire Power
Vampire power should be lower, mostly at 230V.
Pages:
Hi,
“Buy Super Flower Leadex VII XP 1200W” button leads to Newegg page with a PRO version of this model which is very different (unknown to me at the time of order). I didn’t see 1200W PRO review on this site (is there one?), however, according to 1000W PRO version review the PRO model is way worse than non PRO.
Should I cancel the order of Super Flower Leadex VII XP 1200W PRO?
leadex vii xp1200 platinum or leadex vii xg 1300 gold, price is similar. Which one is better for amd 9950x + 5090 GPU? Thank you.
I would go for the XP unit
Hi,
Thanks so much for reviewing this unit, very helpful as I’m looking to upgrade in a way that also allows sufficient headroom to use next generation GPUs.
Looking at the latest versions that are up for sale it appears as though Super Flower has changed the connector design to what they are calling their “universal Super Connector”. I would imagine this doesn’t have any impact on the performance of the unit but I am by no means an expert.
Also with rumors that next gen GPUs could require 2x 12VHPWR, would the use of universal connectors enable this (with a combination of a 12+4 and 2×6+2 cables)?
Are you sure you reviewed the XP model here and not the XG ? because the photos on your site and the photos on the manufacturer’s site don’t match up ,on the manufacturer’s site XP model has different connector plugs on the psu side.
this was an early sample and because of my results, they changed the model’s number. Actually because of Cybenetics ratings.
Hi Aris,
i am still a little bit confused. On their website Super Flower lists a XG (Super Flower Leadex VII XG) and a XP (Super Flower Leadex VII Platinum Pro) series, both Cybenetics Platinum certified.
Your Cybenetics measurements for both series are almost identical. Except for different cable lengths, is there any difference between those psu’s? Or is this only a relabeling because of your cybenetics rating? In germany the XP and XG 1000w models cost almost the same. Assuming the price stays the same, which series would you recommend?
Thanks 🙂
Hi! We don’t do re-labeling, we have to check everything.
SF followed/thought according to the 80 P scheme. They will start thinking according to Cyben’s schemes from now on. If they cost the same, XP.
At the same prices, which is better and do you recommend buying seasonic Vertex platinum px 1200 or leadex vii 1200 platinum or leadex vii 1300 gold ?
thank you.
Where you found/buyed it in Germany?
I want it too.
SF sent it to me, I didn’t buy it. Sorry no clue where you can find it in Europe.
Hello,
I was wondering if this PSU is really atx 3.1 specification? If the connection is loose, will it short out and do the 0 watt/protection feature? Does it also have “Permitted on the 12V rail up to 13.75A for 0.1ms (165W), allowing for higher power draw from PCIe devices”?
I understand this is a really good PSU, but at the same time the 3.1 spec is confusing.
Thanks
Hi! It is ATX v3.1 since Intel doesn’t require 12V-2×6, but it says it is mandatory only on the GPU.
It can deliver 200% of its power for 0.1ms.
It can be confusing indeed!
Hello, Superflower has released this 1200 model in PRO version, with other types of connectors, I don’t know if it has more internal differences and is superior to the one in the review, are you going to do an article on the new 1200w model?
thank you and greetings.
https://www.super-flower.com.tw/en/products/leadex-vii-xp-1200w-atx-30-bk-20240123160801
As the previous author, I am also wondering if this PSU as part of new ATX 3.1 standard will send open open signal when nothing is connected to the high power plugs? If not, does it mean it’s not 3.1? Recently I have ordered this model in PRO version.