Hold Up Time
The hold-up time is high, and the power-ok signal is accurate. It is good to see ATX v3.1 units not having a hold-up time below 17ms.
Inrush Current
The inrush currents are high, especially at 115V. Note that I take inrush current readings using the worst-case scenario when the bulk cap is almost empty, which is challenging to achieve.
Timings
The PSU supports Alternative Low Power Modes.
Pages:
What differences Leadex III and Leadex VII series have?
different platform
Do you think the 1000w version of this PSU is good? There’s no reviews on it
Should I buy Super Flower Leadex III 1300W ATX v3.1 or Cooler Master MWE gold v2 1250w to be on safe site about 2vsb rail?
SF told me that they will fix the 5VSB OCP.
thank you for replying! what about NZXT c1000 atx3.1 or Corsair RM1000e? NZXT c1000 atx3.1 is just few dollars more at my country
I got this PSU but I think mine is dead. Tried doing a BIOS flashback with just the motherboard and cpu power plugged in and nothing happened (yes the psu was switched on). I then did the paperclip test and the fan didnt spin but im not sure if it normally spins at startup. Does anyone know? I tried both with ECO on and ECO off.
with ECO off the PSU’s fan should start.
Thanks for your review. Any thoughts on what you’d pick between the 1000W version of this and the new (ATX 3.1) RM1000x that you reviewed in September?
I am also looking at the Leadex VII XP Platinum that you recommend in your guide. But I think this review is the first time anyone has looked at one of the new ATX 3.1 Leadex III models.
The difference in Wattage us huge between these two, 300W. If you need more power, the Leadex III.
Aris do you have any info for Asrock PSU ?
Yes. FSP and HEC OEMs.