MSI MPG A1000GS PCIE5 ATX v3.1 PSU Review

Average Noise

The PSU’s average noise output is low, among the lowest in the 1000W category. Considering that this platform is not among the most efficient, actually pretty far from it, this doesn’t make me feel comfortable.

Fan Noise & Speed Maps @ 28-32 °C – 115V

The semi-passive mode lasts up to about 360W at 12V, with a light to 90W combined load on the minor rails. At up to 580W at 12V, the PSU’s noise is below 15 dBA, and the 30 dBA mark is passed at 800W, with the fan’s noise entering the 35-40 dBA region with higher than 890W loads at 12V.

Fan Noise & Speed Maps @ 28-32 °C – 230V

The 230V fan noise profile is a little looser, mostly at high loads. The 35-40 dBA region is notably smaller, affecting the average noise output.

Pages ( 9 of 11 ): « Previous12345678 9 1011Next »

Related Posts

11 thoughts on “MSI MPG A1000GS PCIE5 ATX v3.1 PSU Review

  1. Considering getting the A1250GS version of this as I have a MSI 5090 Vanguard coming in soon and currently only have a EVGA 1000 GT for my 13900K/5090 build. Do you think the 1250 version should be similar to this one? I was looking to get an ATX 3.1 PSU and mainly wanted to go with MSI on the off chance anything happens with the card, they then can’t blame the PSU.

  2. Hello, Aris ! I’ve been looking at multiple benchmarks and reviews on your page and on the cybernetic’s site and idk that psu to choose for a 5070 level of build, the super flower 850w leadex vii gx, the msi a850g, or the corsair rmx 850w atx 3.1, price wise the first 2 are basically the same price and the corsair one is 25$ more expensive

          1. Thanks for your suggestion ,but I’ll probably get the xg psu because it’ll allow for a longer gpu in my 20l case

  3. Hi, Aris! I scrolled down Enermax’s website, and came up with Enermax Revolution III. It is said to be ATX 3.1, and i’m pretty sure it’s a replacement for Revolution DF judging from its price

    Would you be consider to review this unit? Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *