Montech Titan PLA 1200W ATX v3.1 PSU Review

Load Regulation

Test 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) Temps (In/Out) PF/AC Volts
10% 8.047A 1.989A 1.984A 0.98A 119.975 86.863% 0 <6.0 44.31°C 0.956
12.224V 5.028V 3.326V 5.104V 138.127 40.11°C 114.83V
20% 17.094A 2.985A 2.98A 1.178A 239.919 90.906% 0 <6.0 45.44°C 0.972
12.228V 5.025V 3.322V 5.094V 263.919 40.92°C 114.79V
30% 26.450A 3.485A 3.479A 1.377A 359.073 91.784% 0 <6.0 46.21°C 0.978
12.213V 5.022V 3.319V 5.084V 391.211 41.14°C 114.76V
40% 35.897A 3.985A 3.981A 1.577A 479.464 91.667% 943 23.4 41.61°C 0.979
12.208V 5.019V 3.316V 5.074V 523.049 47.12°C 114.72V
50% 44.961A 4.984A 4.983A 1.778A 599.293 91.342% 935 23.2 42.38°C 0.98
12.206V 5.017V 3.312V 5.062V 656.094 48.45°C 114.68V
60% 54.053A 5.985A 5.986A 1.98A 719.819 90.834% 929 23.1 42.86°C 0.983
12.211V 5.013V 3.308V 5.052V 792.458 49.38°C 114.63V
70% 63.084A 6.987A 6.99A 2.182A 839.455 90.152% 1020 26.0 43.3°C 0.985
12.212V 5.01V 3.305V 5.041V 931.159 50.32°C 114.59V
80% 72.151A 7.989A 7.996A 2.285A 959.446 89.28% 1121 29.2 43.98°C 0.988
12.219V 5.006V 3.301V 5.032V 1074.645 52.01°C 114.55V
90% 81.529A 8.494A 8.489A 2.389A 1079.275 88.486% 1220 31.6 44.63°C 0.99
12.226V 5.003V 3.298V 5.023V 1219.711 53.67°C 114.5V
100% 90.703A 8.999A 9.014A 2.998A 1199.309 87.521% 1316 34.1 45.61°C 0.992
12.233V 5V 3.295V 5.004V 1370.312 55.7°C 114.44V
110% 99.784A 10.006A 10.118A 3.002A 1319.935 86.462% 1619 39.6 46.75°C 0.993
12.242V 4.996V 3.291V 4.997V 1526.609 57.63°C 114.4V
CL1 0.113A 15.041A 14.959A 0.001A 126.296 82.31% 989 25.1 41.39°C 0.966
12.273V 5.006V 3.316V 5.117V 153.443 56.74°C 114.81V
CL2 0.113A 24.968A 0A 0.001A 126.253 80.627% 1166 30.3 40.63°C 0.965
12.261V 5.001V 3.326V 5.122V 156.587 51.99°C 114.82V
CL3 0.113A 0A 24.888A 0.001A 83.885 74.574% 1166 30.3 40.58°C 0.955
12.246V 5.024V 3.315V 5.117V 112.485 49.16°C 114.83V
CL4 98.213A 0A 0A 0A 1199.885 88.173% 1317 34.1 45.88°C 0.99
12.217V 5.015V 3.304V 5.073V 1360.841 61.76°C 114.46V

Load regulation is not tight at 12V, the most important rail, and at 3.3V. It is within 1% at 5V, but not competitive at this high-end category.

Ripple Suppression

Test 12V 5V 3.3V 5VSB Pass/Fail
10% Load 13.3 mV 14.2 mV 15.1 mV 19.4 mV Pass
20% Load 26.7 mV 13.0 mV 13.8 mV 16.3 mV Pass
30% Load 18.8 mV 12.8 mV 13.7 mV 16.2 mV Pass
40% Load 17.1 mV 13.8 mV 15.2 mV 30.2 mV Pass
50% Load 17.3 mV 14.1 mV 15.3 mV 30.1 mV Pass
60% Load 17.1 mV 14.1 mV 15.4 mV 30.3 mV Pass
70% Load 25.3 mV 20.3 mV 25.2 mV 29.3 mV Pass
80% Load 15.8 mV 15.9 mV 19.8 mV 28.6 mV Pass
90% Load 16.6 mV 17.9 mV 22.1 mV 29.4 mV Pass
100% Load 23.7 mV 18.2 mV 22.0 mV 31.7 mV Pass
110% Load 24.9 mV 17.4 mV 20.5 mV 32.9 mV Pass
Crossload 1 13.7 mV 16.2 mV 19.3 mV 35.7 mV Pass
Crossload 2 16.7 mV 25.6 mV 18.2 mV 34.8 mV Pass
Crossload 3 15.2 mV 15.6 mV 19.0 mV 34.2 mV Pass
Crossload 4 24.0 mV 16.1 mV 18.1 mV 31.8 mV Pass

Ripple suppression is good enough.

Pages ( 4 of 11 ): « Previous123 4 567891011Next »

Related Posts

10 thoughts on “Montech Titan PLA 1200W ATX v3.1 PSU Review

  1. Would you consider reviewing some of the sama psus like black diamond, black hole, XP, and even the new upcoming GT series? When they’re in stock they’re at incredible prices, and my buddy who’s working on a psu database says some of their electrical performance is debatably a tier.

  2. Are there any notable safety concerns when using this as compared to a better reviewed 1200W-1300W PSU with a MSI RTX 5090 SUPRIM SOC?

    I already purchased this PSU (felt it was good as it is a Seasonic OEM and there are also very few white PSUs at >1200W)

    However I am now concerned after reading the cons listed in this review, and might switch to the [ASRock Taichi TC-1300T] or [Lian Li Edge Gold/Plat 1200W/1300W] if it would improve safety levels

    1. Look at the protection features table, everything you need to know is on this page.

      I liked the Taichi units, FSP is trying hard to make them highly competitive.

Leave a Reply

Your email address will not be published. Required fields are marked *