Box & Bundle
There is a photo of the PSU at the face of the box, with the punched fan grill in clear view. The protection is adequate at the internals, with packing foam surrounding the product.
Product Photos
The punched fan grille could be less restrictive. On the front side, besides the power switch and the AC receptacle, you will also find a smaller switch for toggling on/off the PSU’s semi-passive operation. Around the back, the modular panel hosts twelve sockets, including a 12VHPWR.
Cables
| Modular Cables | ||||
| Description | Cable Count | Connector Count (Total) | Gauge | In Cable Capacitors |
|---|---|---|---|---|
| ATX connector 24-pin (600mm) | 1 | 1 | 16-18AWG | No |
| 4+4 pin EPS12V (700mm) | 2 | 2 | 16AWG | No |
| 6+2 pin PCIe (700mm+150mm) | 1 | 2 | 16-18AWG | No |
| 6+2 pin PCIe (700mm) | 2 | 2 | 16AWG | No |
| 12+4 pin PCIe (700mm) (600W) | 1 | 1 | 16-24AWG | No |
| SATA (555mm+150mm+150mm) | 3 | 9 | 18AWG | No |
| 4-pin Molex (450mm+120mm+120mm+120mm) | 1 | 4 | 18AWG | No |
| AC Power Cord (1400mm) – C13 coupler | 1 | 1 | 14AWG | – |
All others except for the high-power PCIe cable (12VHPWR) are flat. The ATX cable is 600mm long. The EPS cables are 700 mm long, and all PCIe legacy cables measure 700mm up to the first connector, and the second is 150mm further away. The high-power PCIe cable is 700mm long. The number of peripheral connectors is high enough, and the distance between the SATA connectors is adequate. This is not the case for the distance between the 4-pin Molex connectors, which is short at 120mm.
