Relative Perf & Perf Per Watt (Raytracing + DLSS/FSR + FG)
- Alan Wake II
- Black Myth Wukong
- Cyberpunk 2077
- Dragon Age: The Veilguard
- Indiana Jones and the Great Circle
- Ratchet & Clank: Rift Apart
FHD (1920 x 1080)
 |
 |
With FG enabled, the RTX 5080 is 8% better at FHD than the RTX 4080. There is also a 10% improvement in performance per watt.
QHD (2560 x 1440)
 |
 |
At QHD, the performance improvement is at 11%, and the performance per watt boost is also notable at 13%.
UHD (3860 x 2160)
 |
 |
This is the largest difference I noticed, at 15%, while the performance per watt boost is a little lower at almost 14.5%. I used the same frame generation for all cards in these charts (2x).
Pages:
- Prologue & Technical specifications
- NVIDIA’s Key Technologies
- Box & Contents
- Part Analysis
- Specifications Comparison
- Test System
- Game Benchmark Details
- Raster Performance
- RT Performance
- RT Performance + DLSS/FSR Balanced
- Raytracing Performance + DLSS/FSR Balanced + FG
- DLSS/FSR Balanced (No RT)
- DLSS/FSR Balanced + FG (No RT)
- Relative Perf & Perf Per Watt (Raster)
- Relative Perf & Perf Per Watt (Raster + DLSS/FSR)
- Relative Perf & Perf Per Watt (RT)
- Relative Perf & Perf Per Watt (RT + DLSS/FSR)
- Relative Perf & Perf Per Watt (RT + DLSS/FSR + FG)
- Rendering Performance
- Operating Temperatures
- Operating Noise & Frequency Analysis
- Power Consumption
- Clock Speeds & Overclocking
- Cooling Performance
- Epilogue
why dont you report on coil whine? i care about that more than anything else
Εξαιρετική παρουσίαση της RTX 5080 καρτας γραφικων! Οπως ειπωθηκε σωστα στο βιντεο εδω δεν βλεπουμε μια νεα καρτα απο θεμα επιδοσεων hardware,αλλα απο θεμα νεου software! Οπως τοτε με τη 7000 Gen της Radeon με απιστευτη αυξηση FPS μεσω του Fidelity 3 ετσι και τωρα βλεπουμε μια νεα gen στο θεμα DLSS4 και τιποτα παραπανω!
Aris i have an Andyson PX-1200 Platinum with ATX 2.53 spec should it okay to handle RTX 5080 with 12v-2×6 converter ?
power wise is ok, but I don’t trust adapters/converters.
did the 12v-2×6 converter still had bad melting behavior in RTX 50xx series with high wattage PSU like 1000W++, and do you have any suggestion for ATX 2.53 users who want to pairs their PSU with RTX 50xx series ?
There will always be issues in everything, but the fact is that 12V-2×6 is much safer than 12VHPWR. As for ATX 2.53 users, get proper cables from the respective brands, 2x 8-pin to 12+4