GALAX GeForce RTX 5070 1-Click OC Performance, Power Analysis & Noise Output

Noise Output

Fan Full Speed, 75% & 50%

The noise output is low on all the levels I tried: full speed, 75%, and 50%.

Idle, Multimedia & Rendering

The noise output in rendering was pretty high.

Gaming

The not-so-beefy cooling system is stressed, so the fans have to spin at high speeds during gaming to keep the GPU cool.

Furmark

In Furmark, where the card is stressed, the output noise is close to 35 dBA, which is high enough.

Frequency Plots

30% Fan Speed (Min Fan Speed)

• Peak Frequency: 1.6 KHz

49% Fan Speed (Gaming Vsync On – AVG / 1% High RPM)

• Peak Frequency: 1.6 KHz

50% Fan Speed

• Peak Frequency: 1.6 KHz

54% Fan Speed (Rendering – AVG RPM)

• Peak Frequency: 1.6 KHz

63% Fan Speed (Rendering – 1% High RPM)

• Peak Frequency: 1.6 KHz

66% Fan Speed (Gaming – AVG RPM)

• Peak Frequency: 1.6 KHz

67% Fan Speed (Gaming – 1% High RPM)

• Peak Frequency: 1.6 KHz

68% Fan Speed (3DMark Speed Way 4K – AVG RPM)

• Peak Frequency: 1.6 KHz

69% Fan Speed (3DMark Speed Way 4K- 1% High RPM)

• Peak Frequency: 1.6 KHz

70% Fan Speed (Furmark – 1% High RPM)

• Peak Frequency: 1.6 KHz

75% Fan Speed

• Peak Frequency: 1.6 KHz

100% Fan Speed

• Peak Frequency: 1.6 KHz

Signal Recordings

I have recorded the signals shown above, but please keep in mind that I’ve enabled Automatic Gain Control (AGC) to do so to make it easier for you to reproduce them. The provided recordings are only offered for aural identification purposes.

30% Fan Speed (Min Fan Speed)

49% Fan Speed (Gaming Vsync On – AVG / 1% High RPM)

50% Fan Speed

54% Fan Speed (Rendering – AVG RPM)

63% Fan Speed (Rendering – 1% High RPM)

66% Fan Speed (Gaming – AVG RPM)

67% Fan Speed (Gaming – 1% High RPM)

68% Fan Speed (3DMark Speed Way 4K – AVG RPM)

69% Fan Speed (3DMark Speed Way 4K- 1% High RPM)

70% Fan Speed (Furmark – 1% High RPM)

75% Fan Speed

100% Fan Speed